|
Alternative Designations:
Coil sheets of this alloy are for re-rolling to foil
products.
Note: 1235
alloy is normally produced to Aluminium Association specifications,
but other National Standards may be met on request.
| Chemical
Composition: |
|
|
|
|
|
Other
elements
|
|
|
|
Si+Fe
|
Cu
|
Mg
|
Zn
|
Ti
|
Each
|
Total
|
Al
|
|
(%
max)
|
0.65
|
0.05
|
0.05
|
0.10
|
0.06
|
0.03
|
-
|
99.35 min
|
Typical Uses:Plain or laminated foil for flexible
packaging; household aluminium foil.
Availability (GARMCO Standard):
|
Temper
|
Tensile Strength,
N/mm²
|
Elongation
in 50 mm, %
|
Available Gauge,
mm
|
| |
Minimum
|
Maximum
|
Minimum
|
|
|
H14
|
88
|
127
|
2
|
0.35 - 1.60
|
|
H15
|
117
|
145
|
2
|
0.35 - 1.10
|
|
H16
|
118
|
147
|
2
|
0.35 - 1.10
|
|
H18
|
138
|
-
|
1
|
0.35 - 2.45
|
|
F
|
-
|
-
|
1
|
0.35 - 3.00
|
Other tempers are to be agreed with
customer. These may be in terms of tensile property limits or on
intermediate anneal point.
| Thickness:
|
|
|
0.35 - 3.00 mm (Thickness
outside these limits are subject to inquiry).
|
| Width:
|
|
|
800 - 1560 mm (Wider and narrower
widths are subject to inquiry).
|
| Coil
Density: |
|
|
In kg per mm of width, 2.1
/ 2.5 / 4.2 / 5.0 nominal. Coil weights outside of these limits
are subject to inquiry.
|
| Form:
|
|
|
Coil
|
| Arbors:
|
|
|
300, 400, 508, 600 mm
|
| Annealing:
|
|
|
340ºC ± 5ºC, until all parts have reached
the annealing temperature. Different temperatures and long
soak times are often necessary to volatilize the foil rolling
coolant present on the foil surface.
|
| Weight
Calculation: |
|
|
Weight per square metre in
kilogrammes: 2.705 x thickness in mm.
|
|
